Heavy SwimSpa Cover?

Tired of Heavy SwimSpa Covers?

Every typical foam loaded swimspa cover gets heavy. Yet the exactly how and also why may come as a shock. It has nothing to do with rain so it doesn’t matter just how high the taper is, that cover will still get heavy. If it was rain that was making SwimSpa Covers heavy then putting a roof over the spa would stop the swimspa cover from getting heavy.

Dampness getting entraped in the foam is what at some point makes a swimspa cover too heavy to lift. But if it’s not the rainfall, exactly how does the water get in there? The response is steam from the cozy spa water. When water becomes steam it is a much smaller sized molecule than a drop of water.

Steam could enter into a much smaller area, like say the spaces in the foam. Once it cools down pull back and also transformeds into water again, it’s trapped inside the foam. When entraped in the foam the water won’t drain pipes out so an elegant drain opening will not help. The only method the water could get back from the foam would certainly be to vaporize. In order to vaporize, the swim spa cover would certainly need to be removed from the source of heavy steam (the swimspa) and positioned in a completely dry, well ventilated location.

The issue has nothing to do with exactly how well the swim spa cover is cared for or just how much plastic guard is rubbed on it. The trouble is the foam. The type of foam used in SwimSpa Covers is developed to be used as insulation in DRY conditions. As an example it functions well in floors, walls and ceilings (given it is maintained dry) and is terrific for refrigeration applications.

However if the same foam is revealed to vapor, the insulation it could offer is quickly lowered to something equivalent to damp plywood.

So why is foam still being used in Lightweight SwimSpa Covers? It economicals as well as it’s the sector requirement. Yet even if everyone is doing it does not make it the most effective suggestion.

A much better concept as for Lightweight SwimSpa Covers go would be one that eliminates the foam, still protects but remains light weight and easy to use.

Forty years back, (yes actually, forty years ago) that is just how the SpaCap came into being. A single woman with back trouble, needed to be able to use her spa each day for treatment. She needed to have the ability to get her cover off and on by herself without hurting her back.

The spa cover she eventually thought of was lightweight, easy to use and also protected as well as a foam filled hot tub cover. Although it has experienced several enhancements throughout the years, the concept and also concept is still the same. SpaCap.com builds custom Lightweight SwimSpa Covers for all kinds of spas including swim SwimSpa Covers

Don’t head out and buy another foam filled swimspa cover even if that’s exactly what the next-door neighbors do. Check out SpaCap.com and get a Lightweight SwimSpa Covers that will not get heavy or break and also will certainly make it simple for you to use your spa for many years to come!

Can A SwimSpa Cover Save A Life?

Toddler Falls on SwimSpa Cover

It’s not everyday that SwimSpa covers make the news. But it did happen recently in Florida a kid fell from a three story balcony and landed on, you guessed it a SwimSpa cover.

As a grandparent the first thing that enters your mind is, “How was this allowed to happen?” Fortunately this story has a happy ending (the little child was fine and ran back up stairs to tell his grandpa just what happened) but just how did the little guy fall?

From now on lets lock the sliding glass door to stop this future stuntman from duplicating this maneuver. Next time he may miss the swimspa entirely.

A few years ago “Dwarf Tossing” was a popular. After That “Dwarf Bowling” and a couple of various other games along the same lines. Without taking a side as to the civil liberties of dwarfs to be thrown for sport and also amusement, let’s just nip “Toddler Tossing” in the bud before to it too ends up being the brand-new fun game.

In our personal experience a lot of activities seem like a good idea to kids. A number of them seem to lack the “anxiety” genetics or chromosome to alert them to possible danger. As amusing as it may be to view videos of pets misjudging their leaping abilities, nobody wishes to see this with young children.

If on the other hand you would like to lay your toddler delicately on your swimspa cover for some reason, let’s discuss some ground rules first to ensure safety and happy endings.

First guideline. The swimspa or hot tub must be no higher than deck level. If your hot tub is free standing, the range from the edge of the swimspa to the ground would certainly suffice to harm your toddler so better to lay the little bugger on the ground compared to on the swimspa. If on the other hand your spa is flush with the deck it MAY be alright. Carry on to rule two.

Regulation Two. The cover must be properly protected in such a way as to guarantee that the young child can not by mishap or intent access to the swimspa water listed below. Neither by a fall from a great height, substantial impact or other circumstances.

Rule Three. The hot tub cover would have to be a comfortable location to lay one’s kid. If the hot tub cover is a rigid piece of foam it should to be considered not appropriate for kid laying. If the swimspa cover allows a padding like gentleness that will certainly comfort and also embrace the toddler then continue to rule three.

Regulation Four. If a young child is relaxing conveniently on a soft swimspa cover, there should be no jumping on the cover by other individual or pet. This would dislodge the kid and can possibly cause harm.

If you or a person you know would like to purchase such a swimspa cover, visit SpaCap.com

The folks at SpaCap.com have actually been developing Custom SwimSpa Covers for more than forty years. A SpaCap.com Custom SwimSpa Coverdoes not use rigid foam like other hot tub covers. Rather SpaCap.com swimcovers use air chambers to do the insulating and protecting.

This means your new Custom SwimSpa Cover will stay light-weight and easy to use for years to come.

Let’s Go Around

One day as he was driving past the Tri-City Raceway, Curt noticed street cars going around the track. Woods had to assume that some teenagers had broken through the gates and made their way onto the track.

As he drove through the open gate he observed that it showed no signs of damage and as he got closer to the inside he could see that the track clock was on. 

He drove to the center of the track and found a small group of teenagers that made no attempt to flee as he approached.

When he stopped his car they came over.

“Hi officer.”

“Hi guys. What’s going on,” Curt asked.

“I’m Stan Meehan, My dad owns the track and he’s let us bring our cars out to see who can get the best time,” responded one of the boys.

“Well that sounds like more fun than humanly possible,” said Curt. “You go at it one at a time and just let the track timer figure out who goes around the fastest? So let me see who has the best time?”

The boys got excited to share, “Bobby has the best time so far at thirty two seconds with his Camaro. But Jason and Kyle are only one tenth of a second behind him. They have the Charger and the Mustang.”

Curt got out of his car and went to look over the cars. None of the cars were stock. The rear ends were jacked slightly to accommodate larger tires on the back. He knew that even with beefed up engines these cars weren’t going to do that well on the tri-oval track. They were better suited for drag racing in a straight line on a flat track. The tri-oval was steeply banked and built for beefed up suspensions and cars with a lower center of gravity. 

“Mind if I watch,” asked Woods.

“Hell no,” said Stan. “Who’s up next?”

“Chuck,” said Bobby pointing at 1970 Buick Skylark. 

Woods walked over to the car. Again the rear end had been jacked slightly with the use of air shocks and it had wider rear tires than stock. “What have you got under the hood Chuck,” asked Curt.

Chuck was all too happy to pop the hood and show off his 350 V8 with chrome valve covers and a four barrel carburetor. “Very nice,” said Curt. “Let’s see what you can do. But for the love of god don’t wreck it.”

Chuck slammed the hood down and jumped in behind the wheel. He pulled out onto the track as the others cheered him on.

Woods watched the Skylark go around the track three times and saw the automatic track timer readout the time for each lap. Chuck then pulled the car back into the center of the track. His best time had been within a couple tenths of thirty two seconds. As the young man got out of his car the boys all gathered around with excitement.

Curt joined them and said, “Well you guys have a good day, I’ve got to be getting back to work.” He then started walking back to his patrol vehicle.

But Stan wasn’t having it. “Before you go officer, could you show us what you can do in the patrol car?”

“Naw, I don’t want to make you boys feel bad. Your having a good time. Let’s just leave it at that,” said Curt.

“So, you don’t think you can beat our time,” Stan taunted smiling.

Woods smiled, “Something you boys need to realize is that if I’m ever chasing you, I don’t have to beat you. All I have to do is stay with you and come in second. The other thing you need to know is that these patrol cars are built to do just that. Add to that the fact that police officers drive their patrol cars eight hours a day. When you drive a vehicle that much eventually it becomes like a part of your body. That’s why truck drivers can handle their eighteen wheelers so well. You guys are having a great time and more fun than I ever had at your age. I don’t want to ruin that for you.”

Curt got back behind the wheel and started the patrol car. The young men gathered around his door and begged him to give it a go.

“Alright, fine,” said Woods. “But remember, you asked for it. I’ll go around once to get a feel for the track. Time me on the second lap.”

“You got it,” answered Stan as the other boys hollered with excitement. They were all curious to know how close he would come to their times.

Curt drove onto the track and checked out the high banked corners. The first time around he was feeling where the car and his tires were at their drifting limit. The patrol car had wider tires, a beefier suspension and a center of gravity that was about three feet below ground level. Warming up his tires and getting a feel for the track. The second time around he put the patrol car in a full drift for the entire lap. He went around a third time while he slowed down and pulled into the center of the track.

The boys were stunned to silence. Their best times had all been within tenths of a second. Woods had beat their best time on the half mile track by several seconds. Curt then smiled and nodded as he drove out the gate.

Want more stories like this check out the book The Chief Is Missing which is available in audio for those of us that don’t have time to sit down and read. Narrated by Dan Levy.

Another Book by J A Sliger is Code Name Artist. It’s a World War Two drama based on a man that fought the Nazi’s from inside the German Secret Service The Abwehr.

SwimSpa Cover Replacement: Making The Best Choice

The Best Choice in SwimSpa Covers

A swimspa cover is vital for controling energy costs, and to protect the spa from external debris. Traditional spa covers are made with a foam core, and that foam is absorbent. As the foam takes on moisture from seepage and condensation from the heated water rising under a cold closed cover, the cover becomes heavy and difficult to handle. Eventually it will keep you from using your swimspa.

The vinyl material that is typically used to cover a foam core is rated by HOURS which means that when it’s exposed to the sun’s UV rays on a daily basis, it’s going to break down and vulnerable to tearing or being punctured.

The End2End SwimSpa Cover is a relative newcomer to the swimspa cover market. It claims to Lock In Heat and Keep Out Moisture. Admittedly it does have some advantages over the traditional multi piece folding foam swimspa covers. Its one-piece design using closed-cell foam instead of the traditional rigid foam panels prevents it from absorbing water, so it stays light and easy to manage. That much is true. The reason closed cell foam has not been used in the traditional rigid swimspa covers is that it isn’t rigid. It would sag without support.

The roll up cover overcomes that by having a support system built into the cover. The down side is that the rigid support holds the thin layer of closed cell foam far above the water it is supposed to be keeping warm. The result is that it creates a constant storm of evaporation/condensation under the cover which causes the swimspa to work harder to keep the water warm.

End2End claims to have a UV-resistant coating that keeps it strong against the elements and new-looking for years. Unfortunately, this is not true. Although they charge enough to use a more expensive fabric, like Sunbrella, they use cheap canvas. The canvas material won’t last no matter what they claim. In areas that get a lot of sun it will start to fall apart in about one year.

The roll-on, roll-off design makes it easy for a single person to handle. In fact, this exclusive feature makes it possible to roll the cover off a swimspa in less than 60 seconds. It can be rolled in either direction, making it ideal for dual-temperature swimspas. You can roll back the pool side for your daily swim, and then roll back the spa side for relaxing at night. Aside from being extremely easy to take on an off, it requires minimal overhead clearance and gives full visibility on all sides of the swimspa as compared to traditional covers which can be problematic for applications with height restrictions or if you are trying to enjoy views. Admittedly, this is a great improvement over the traditional swimspa covers. The biggest downside is that despite costing three to four times more than a foam filled cover it doesn’t last. Most consumers report that it falls apart in less than two years.

End2End claims that their covers are “Custom made with the highest quality commercial-grade materials, this durable, energy-efficient and lockable safety cover is built to withstand all weather conditions. Its full-frame design makes it able to handle even large loads of snow, and thanks to its UV protected surface, it will not deteriorate from time spent in direct sunlight.” Unfortunately the only part of that statement that is true is that it’s lockable. It will blow off in a mild wind, it will crush or tear apart in a minimal snow load and the UV protection is a total lie.

Made in the U.S.A., the End2End SwimSpa Covers are available in a range of colors. But not nearly as many as the SpaCap.com SwimSpa Covers which can be done in any of the over sixty colors of Marine Grade Sunbrella.

So what’s the down side? Although the closed cell foam is an improvement it has to be supported to keep the rain and debris out of the spa. That support will eventually breakdown and usually in less than two years. It will never be able to handle as much of a snow load as the SpaCap SwimSpa Cover which rests right on the water surface.

The UV resistant coating is a code for, “it will handle a sun a little longer than a traditional cover” but not nearly as long as Marine Grade Sunbrella which is used on the SpaCap SwimSpa Cover.

In the end, The SpaCap.com SwimSpa Covers are still the overall best choice. No other swimspa cover starts insulating at the water surface. A huge advantage since the point is to seal in the heat and keep the water warm.

The SpaCap.com covers are all made in the USA and the Sunbrella fabric will last YEARS longer than any other material, no matter what UV resistant coating they use.

When you really want to get the best swimspa cover on the market you’re still better off with the swimspa cover custom made for your spa by SpaCap.com.

Replacement SwimSpa Covers

Replacement Swim Spa Covers – Considerations

If you need to replace your swim spa cover this year, there are few important things you should consider. A swim spa cover is your spa’s first line of defense against debris and harsh weather conditions and is the key to saving on energy costs as a well-insulated cover will prevent heat from escaping from the swim spa when it’s not in use.

Here’s what you should know before buying a new swim spa cover.

When to Replace a Swim Spa Cover

A typical foam filled swim spa cover usually needs to be replaced every two to three years.

Look for any rips or tears in the vinyl, check the underside of the cover and look for deterioration from mold build-up and chemicals. A replacement swim spa cover is needed if your old one is heavy and waterlogged and a struggle to remove. This is a clear sign that the foam cores are saturated with water.

Choose Sunbrella instead of Vinyl

All vinyls are rated by HOURS outdoors. Sunbrella is rated by YEARS outdoors. Your new swim spa cover should be covered in Sunbrella that will be more resistant to UV damage, fading and discoloration from the sun than vinyl ever could be. By the way mildew inhibitors in the vinyl will never prevent the build-up of mold that causes those unpleasant odors. The spaces in the foam, and in between the layers of plastic are a near perfect breeding ground for mildew. No amount of cleaning will get rid of it.

Is Cover Thickness is Important?

A typical foam filled swim spa cover will be from four to six inches thick. Foam cover dealers like to push thicker covers saying they will stand up better to the elements. But the truth is the thickness has nothing to do with why the cover gets heavy or fails. It’s the steam from the spa. If the cover getting heavy was caused by the weather then a roof over the spa would stop it from getting heavy. Thicker foam would do a better job insulating if it were used in dry conditions. However as soon as it is put in use over a source of steam the insulation value will always go down quickly.

So what’s a better solution? Well it would be better to have the cover lay right on the water since that’s what we are trying to keep warm. Since air is the best insulator, it should use layers of air to insulate. It should have a natural dome shape so wind and weather will flow easily away. The layers of air are the key to keeping heat from escaping from your spa, therefore saving you money on energy costs.

If you live in an area that receives a lot of snow during the winter, a rigid foam cover will always fail under a heavy wet snow load. Whereas an air filled swim spa cover that rests right on the water will be able to withstand a much greater snow load, as well as providing greater insulation.

Locking Straps for Safety

Locking straps on a spa cover will not only keep it from blowing off during heavy winds, but they are a good safety feature to have to keep small children and pets from getting into the hot tub when you’re not around.

Choosing a Color

Choosing the right color for your spa cover is a fun but important decision, as they can enhance and complement your surroundings. Fortunately, Sunbrella is available in about 80 different colors. Instead of choosing between some shade of gray or brown you actually get exactly the color you want. And Sunbrella won’t fade for years. It will still be just as bright ten years after you first put it on your spa.

So before you go out a purchase another foam filled swim spa cover that will just end up like the one you need to replace now, check out the Swim Spa Covers from SpaCap.com.

SwimSpa Covers for West Coast Spas

THE WEST COAST SPAS STORY

West Coast Spas is a family owned & operated local Oregon-based hot tub & swimspa manufacturer with a hot tub factory in Woodburn, Oregon. We manufacture our hot tubs in Oregon’s beautiful Willamette Valley and distribute hot tubs & swimspas throughout the Western US and Canada. We have 3 hot tub stores which offer many hot tubs and swimspas which can be customized to your needs and tastes.

Our Milwaukie hot tub store and our Beaverton hot tub store serve the greater Portland, Oregon metro area and our customers travel from NE Portland and Gresham as well as Hillsboro, Oregon City, and Lake Oswego. From our Salem hot tub store we serve customers from Silverton to Lincoln City on the Oregon Coast.

At SpaCap.com They are ready to help you design a customized swimspa cover to fit your West Coast SpasSwim Spa

SpaCap.com has been building custom spa covers for forty years. That’s longer than swimspas have been around! During that time the folks at SpaCap.com have developed a swimspa cover design as unique as your custom swimspa.

Does your swimspa have a waterfall? No problem! Is that old foam cover keeping you from enjoying your swimspa? SpaCap.com has the answer. Plus you can get it to match your backyard decor!

All the SpaCap.com SwimSpa Covers are covered with Marine Grade Sunbrella in all the colors Glen Raven Mills offers.

So if you want a custom swimspa cover to cover your West Coast Spas SwimSpa that’s as easy to remove as a comforter from your bed visit SpaCap.com and order yours today!

Finding The Best SwimSpa Cover

Getting The Best SwimSpa Cover

SwimSpas represent unique obstacles when it pertains to covering them.
We can all agree that the swim spa needs to be covered when not in use for all the same reasons a hot tub needs a cover. The challenge is that because of the length of the swim spa and the height of the sides, removing and changing the SwimSpa Cover can be a lot harder.
Getting a new swim spa is an amazing event in life. You’re looking forward to the exercise you’ll receive from using it. Possibly you’re a little relieved to have lastly selected from the different models you took a look at. At any rate, you most likely weren’t believing much about the SwimSpa Cover you would use.
Usually, the cover that comes home with your brand-new purchase will be a 4 section rigid foam filled SwimSpa Cover that will divide in the center and go off both ends.
No big deal.
Until it starts to get heavy.
Which it constantly does.
Every rigid foam filled SwimSpa Cover ever made winds up the same way and it is not the fault of the user. It’s a design defect. Integrated in obsolescence due to the fact that as quickly as it is positioned in use over the warm water in your swim spa it is unavoidable.
It’s not from rain, so having a taper will not make any distinction. In fact you might have it under a roof and the SwimSpa Cover will still get heavy.
The factor is the steam from the water. The molecules of steam are really small as they rise from the water surface. They make their way into the little cracks and crevices in the foam.

Then as the steam cools it forms back into a liquid and ends up being trapped in the SwimSpa Cover
It occurs slowly and on a SwimSpa Cover which is made from private areas, at varying speeds. So eventually you’ll notice one or two of the sections are truly getting heavy. The bar lifters on completions of the swim spa aren’t much aid because you still need to lift that heavy SwimSpa Cover back up onto the spa which is a lot higher than a routine spa.
This is why SpaCap.com developed a different style for their Lightweight SwimSpa Covers
Instead of using a number of foam panels that will eventually wind up in some land fill, they designed Lightweight SwimSpa Covers that uses air chambers that do not suck up moisture.
In fact SpaCap.com Lightweight SwimSpa Covers are easy to use, insulate much better, won’t blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine material, these Lightweight SwimSpa Covers will not fade, or break down at the joints either. So if you own a swim spa, and you plan to keep using it everyday, SpaCap.com has the SwimSpa Cover for it.
If you’re not prepared to buy today, bookmark this website so you can find it once again when you’re all set!

SwimSpa Covers for Premium Leisure SwimSpas

Premium Leisure SwimSpas and Aquatic Trainers are manufactured in the United States using only ETL and UL approved electrical components. Each spa is uniquely designed with features and benefits that will grace your backyard and provide years of training, therapy, relaxation and family fun.

They are made of high quality cast acrylic, reinforced with fiberglass and supported by a 16 gauge welded steel frame. They come with a maintenance friendly cabinet, in your choice of colors, to match the décor of your home or landscape. Even the little things like a thick plastic base to protect your decking and isolate the elements of nature are things that are standard with a Premium Leisure SwimSpa.

At SpaCap.com They are ready to help you design a customized swimspa cover to fit your Premium Leisure SwimSpa.

SpaCap.com has been building custom spa covers for forty years. That’s longer than swimspas have been around! During that time the folks at SpaCap.com have developed a swimspa cover design as unique as your custom swim spa.

Does your swimspa have a waterfall? No problem! Is that old foam cover keeping you from enjoying your swimspa? SpaCap.com has the answer. Plus you can get it to match your backyard decor!

All the SpaCap.com SwimSpa Covers are covered with Marine Grade Sunbrella in all the colors Glen Raven Mills offers.

So if you want a custom swimspa cover to cover your Premium Leisure SwimSpa that’s as easy to remove as a comforter from your bed visit SpaCap.com and order yours today!

SwimSpa Covers for Michael Phelps SwimSpas

The Michael Phelps SwimSpas by Master Spas were created “with input” from the popular swimmer, Michael Phelps, and his coach, Bob Bowman, and the specialist designers of Master Spas.

The company internet site asserts that these are just one of the most energy-efficient swimspas in the market, as a result of the green icynene foam insulation. In their very own words, “Every swimspa is constructed to not just fulfill but to exceed the strict California Energy Commission (CEC) efficiency criteria.” They additionally have high density polymer base which keeps away pests as well as helps to keep the heating, manifold pipes which ensures the equivalent spread of pressure in the jets.

They likewise include Noise Reduction, EcoPur as well as Ozone systems. The EcoPur ® System consists of a filter which incorporates a mix of minerals which aid not only the removal of bigger contaminations, yet additionally of the microorganisms as well as heavy metals, causing softer water. The Ozone System eliminates the microorganisms, making the water fresh as well as tidy.

Its Wave Propulsion ™ Technology System supplies you a swimming experience with much less disturbance and the SwimNumber ™ System enables you to set the suitable swimming, training speed according to your needs. Some exercise programs are pre scheduled, so you could pick in between the beginners, intermediate or sophisticated degrees. Again it is offered in a variety of lengths and also configurations consisting of the spa on one end that can be at a different temperature level. The one noticeable distinction is the housing. On the pump end, the one you swim towards, an excellent foot to eighteen inches is used up by the pump functions. Not a big bargain but if your buying  SwimSpa Covers for it, you’ll be covering a section you can not swim in or sit in.

One essential factor that could truly dampen your pleasure is trying to lift heavy, SwimSpa Covers off and back into the swim spa. Standard stiff foam filled SwimSpa Covers will constantly wind up saturated which water inside foam SwimSpa Covers will certainly ice up essentially you’ll end up with a block of ice over your swimspa. As well as that relocating heavy SwimSpa Covers when there can be ice around the spa can be hazardous. Prevent the inconvenience by going to SpaCap.com and ordering a Lightweight SwimSpa Covers that will not get heavy or break.

Getting The Best SwimSpa Cover

SwimSpas represent unique obstacles when it pertains to covering them.
We can all agree that the swim spa needs to be covered when not in use for all the same reasons a hot tub needs a cover. The challenge is that because of the length of the swimspa and the height of the sides, removing and changing the SwimSpa Cover can be a lot harder.
Getting a new swimspa is an amazing event in life. You’re looking forward to the exercise you’ll receive from using it. Possibly you’re a little relieved to have lastly selected from the different models you took a look at. At any rate, you most likely weren’t believing much about the SwimSpa Cover you would use.
Usually, the cover that comes home with your brand-new purchase will be a 4 section rigid foam filled SwimSpa Cover that will divide in the center and go off both ends.
No big deal.
Until it starts to get heavy.
Which it constantly does.
Every rigid foam filled SwimSpa Cover ever made winds up the same way and it is not the fault of the user. It’s a design defect. Integrated in obsolescence due to the fact that as quickly as it is positioned in use over the warm water in your swimspa it is unavoidable.
It’s not from rain, so having a taper will not make any distinction. In fact you might have it under a roof and the SwimSpa Cover will still get heavy.
The factor is the steam from the water. The molecules of steam are really small as they rise from the water surface. They make their way into the little cracks and crevices in the foam.

Then as the steam cools it forms back into a liquid and ends up being trapped in the SwimSpa Cover
It occurs slowly and on a SwimSpa Cover which is made from private areas, at varying speeds. So eventually you’ll notice one or two of the sections are truly getting heavy. The bar lifters on completions of the swim spa aren’t much aid because you still need to lift that heavy Swim Spa Cover back up onto the spa which is a lot higher than a routine spa.
This is why SpaCap.com developed a different style for their Lightweight SwimSpa Covers
Instead of using a number of foam panels that will eventually wind up in some land fill, they designed Lightweight SwimSpa Covers that uses air chambers that do not suck up moisture.
In fact SpaCap.com Lightweight SwimSpa Covers are easy to use, insulate much better, won’t blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine material, these Lightweight SwimSpa Covers will not fade, or break down at the joints either. So if you own a swim spa, and you plan to keep using it everyday, SpaCap.com has the SwimSpa Cover for it.
If you’re not prepared to buy today, bookmark this website so you can find it once again when you’re all set!